|
| |
Plastic Bar Stock - Rectangles
- ABS
is an easily machined, tough, low-cost rigid High Impact material
- Acetal
Copolymer has dimensional stability, lower moisture absorption, and easier machinability than nylon, but is not as good in slide wear. It is FDA/USDA/NSF/3A Dairy Approved, has continuous-use temperature of 180° F
- Acetal
Homopolymer, is Administration (FDA)
Compliant and U.S. Department of Agriculture (USDA) Compliant and NSF
International (NSF) Compliant.
- Acrylic, Extruded
offers good clarity at an economical price and Cast offers consistent and
superior clarity for more high tech applications.
- Buna Rubber
- CPVC,
is a rigid thermoplastic exhibiting similar
advantages to PVC yet retaining these properties at higher temperatures. It
exhibits excellent fire resistance, chemical resistance.
- Fiberglass,
is Corrosion Resistant, Non-Conductive Thermally and
Electrically, Lightweight, and High Strength.
- HDPE,
is more rigid and harder than low density materials
and is three times better in compressive strength. HDPE complies with FDA
requirements for direct food contact applications. It is also accepted by
USDA, NSF and Canadian Department of Agriculture.
- LDPE,
Flexible. Natural milky color. Translucent. High
impact strength. Excellent environmental stress crack resistance. Low water
and alcohol permeability. Resistant to many chemicals
- Neoprene,
are a synthetic rubber material designed to act flexibly, durably, and to
resist breakdown by water. It is form fitting and resilient. Because air and
water become isolated in its unique molecular structure, Neoprene is
temperately stable.
- Nylon Cast Oil
Filled, A special
formulation of Liquid Lubricant encapsulated during manufacture, provides
for true lubrication at the bearing surface. Its specially formulated OIL,
limits moisture adsorption, making it an ideal bearing material for
submerged or critical tolerance applications.
This grade is also available in Natural Oil Filled for Food Contact
applications. The absence of Pigment permits this grade to conform with FDA
Regulations 21 CFR, Sec. 177.15 and USDA 3A Sanitary Standards 20-17 for
direct contact with food.
- Nylon Cast MDS
Filled, Wear-resistant
nylon is molybdenum disulfide (MDS) filled. The color is grey-black.
- Nylon 6/6,
General Purpose Nylon
- Peek,
provide excellent chemical resistance combined with
heat resistance to 480° F. Used in steam or boiling water applications,
PEEK experiences no significant decline in its properties.
- Polycarbonate,
It is stronger than plate glass and 20 Times stronger than acrylic.
- Polypropylene,
is lightweight, flexible, and an excellent electrical
insulator. It has a hard, very smooth surface that prevents bacteria and
resists chemical corrosion.
- PVC,
is the most widely used member of the vinyl family.
Its major use is for corrosion-resistant applications. PVC can be cemented
when bonding is required, although heat welding is a more acceptable process
when bonding PVC.
- Teflon,
The best chemically resistant material available and
it continuously handles high temperatures. Electrical Insulator and Flame
Retardant and Weather Resistant and Very Low Friction
- UHMWPE,
Wear Resistant. Food and Drug Administration (FDA)
Compliant and U.S. Department of Agriculture (USDA) Compliant.
| |
|
